Contact Us

Crysalli Main Office

Address: 1739 Sabre Street Hayward, CA 94545

Phone:  (510) 732-0100

CR-1-iN2

ProFusion Countertop System

N₂ Beverages on Tap

• Nitrogenated and Still Beverage on Tap.
• Flash chills ambient temp keged beverages.
• The system utilizes one keg of cold brew coffee, tea or your craft beverage of choice to dispense two different style beverages.
• Simple set-up: one keg connection and one gas connection.
• Integrated ProFusion injector nitrogenates the beverage at the time of dispense
• Two on-board regulators feed both the keg and injector pressures.
• Built in stainless steel particulate filter, 50 micron, washable and reusable.
• Optional custom tap handles available.

Specifications

• 50, 12oz cups per hour @<40⁰F
• Self-contained refrigeration system
• Compressor: 1/5 H.P.
• Refrigerant: R134a CFC-free
• Operating temperature range: 40⁰F-100⁰F
• Electrical: 115VAC/60Hz/1 Phase
• 3.4 AMPS
• Minimum circuit breaker size: 15 amps
• BTU: 2,200 per hour average
• Water bath: 5 gallons
• Ice bank: 10 lbs
• Weight: 75
• Cup clearance: 8.5”
• 12.3754”W x 27.5”D x 25”H
• *Actual height varies depending on tap handle style

  pdf Spec Sheet (1008 KB)

  pdf ProFusion Brochure (3.30 MB)

archive CR 1 iN2 2P CAD Files (78 KB)

default QF Crysalli CR 1 iN2 2P REVIT File (948 KB)

CR-24FCP

Water Filter System

CR-804-001

Low Volume Water Boost System

CR-804-023

Water Boost System

CR-804-026

Water Boost System

CR-CWB1

Single Cylinder Safety Restraint Wall Bracket

CR-CWB2

Dual Cylinder Safety Restraint Wall Bracket

CR-PC160-14FCV

Primary high pressure CO2 regulator

For CO2 cylinder use

CR-PN60-516BSO

Primary N2 regulator

For nitrogen gas cylinder use

CR-S115-14FV

Secondary high pressure CO2 regulator

For bulk CO2 or split system use

CR-SDL-1

Universal, lever activated, faucet assembly 

Sanitary dispense lever compatible with:

X0101-B-HEX-SC

Black speedy valve, self closing bent nozzle, hex adjuster.

Standard faucet on CR-1, CR-2 and other countertop Crysalli models and the CM-V2W tower.

CR-SDL-SSX1

Lever activated, faucet assembly 

Sanitary dispense lever with stainless steel faucet:

Rigid stainless steel lever, extends 1.75" below nozzle

Self closing, spring loaded

Downward pointing nozzle

Comes with optional stainless steel tap cap

Use on custom draft towers and as a retrofit kit for CBR towers

iN2-DD2P

ProFusion Beverage Dispensing System

N₂ and CO₂ Beverages on Tap

• Plug and play; factory assembled system.
• The ProFusion system uses one cold keg of cold brew coffee, tea or your craft beverage of choice and dispenses two different style beverages from a single keg.
• Nitrogenated or lightly carbonated, and Still Beverage on Tap.
• Simple set-up: one keg connection and one gas connection.
• ProFusion Injector equipped with two secondary regulators, feeding both the keg and injector.
• Built in stainless steel particulate filter, 50 micron, washable and reusable.
• Optional custom tap handles available.

Features

• Two tap, air cooled, column tower with stainless steel faucets
• 24" width
• 30.125" depth
• 49.25" height*
• ** Actual height varies depending on tap handle style
• Weight: 174 lbs
• iN2-2P Injector, two product device
• N₂ primary regulator
• Available with premix tank quick connect couplers or with D style keg coupler

DD24HC direct draw cooler specifications:

• Volts: 115VAC/60Hz/1 Phase
• 4 AMPS
• Certifications for DD24HC:

  pdf Spec Sheet (667 KB)

  pdf Quick Installation Guide (2.79 MB)

  pdf ProFusion Brochure (3.30 MB)

iN2-TK2P

ProFusion Beverage Dispensing Tapping Kit

N₂ and CO₂ beverages on tap

• The iN2-TK2P tapping kit is designed to convert your existing kegorator or back bar cooler into a ProFusion beverage dispensing system.
• The ProFusion system uses one cold keg of cold brew coffee, tea or your craft beverage of choice and dispenses two different style beverages from a single keg.
• Nitrogenated or lightly carbonated, and Still Beverage on Tap.
• Simple set-up configuration: one keg connection, two outlets. One gas connection feeds both the system and keg (each with their own pressure control).
• High visibility and easy accessible particulate filter.
• Compact, thin design that can easily fit in coolers and not take up excessive space.

Specifications

iN2-2P Specifications:

• 10.5" width
• 4.5" depth
• 12.75" height
• One gas inlet, dual gas control for keg and injector pressures
• One product keg inlet, two product outlets
• Built in stainless steel particulate filter, 50 micron, washable and reusable
• Must be located in a refrigerated space within five feet of dispensing tower
• Liquid and gas inlet/outlet ports are on one side of the iN2-2P injector

iN2-V2 two tap, column tower specifications:

• Two stainless steel faucets
• Insulated and air cooled
• 3/8" barrier hoses
• Supplied with fittings and hose kit

Tapping Kit specifications:

• N₂ primary regulator included
• Available with premix tank quick connect couplers or with D style keg couplers

  pdf Spec Sheet (864 KB)

  pdf Quick Installation Guide (2.79 MB)

  pdf ProFusion Brochure (3.30 MB)